THE CORE MEMORY FORUM
February 24, 2018, 12:06:24 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: NCR390 Programming Manual  (Read 6088 times)
DaveM
Newbie
*
Posts: 1


« on: May 28, 2006, 01:02:50 am »

Hello NCR fans and nostalgia buffs!!

I'm looking for an NCR390 Programming Manual - or whatever the title was that described the 390 instructions in detail (ADD, BLA, CPY, DIV, MUS, RDC, RPT, etc).  Principles of Operation? A gold manual from the 1960s. I have the 1-page summary sheet from that manual.

Reason: I've developed a simulator (or emulator) for the 390, plus a language and compiler, but am hazy on some details for a few instructions (RDL, RPC) and computer actions for the paper tape symbols ER and EW, etc.

Read Ledger/Write Ledger and Read Punched Card Numeric are currently no-opped

Also, I think there were a few more buttons and switches on the console than I'm simulating, and could use some assistance (or a manual) from someone with a very good memory. I've taken pictures of the 390 console, but usually at too great a distance to read the captions on the buttons and switches.

See:
http://home.earthlink.net/~cbwmidwest/Tech/NCR390-Sim-Comp.PDF    PDF documentation

Dave Morton
Minneapolis, Minnesota

marspyrs@aol.com

« Last Edit: May 28, 2006, 01:17:42 am by DaveM » Logged
Flightplannerjim
Newbie
*
Posts: 6


« Reply #1 on: August 19, 2006, 10:22:23 pm »

Hello Dave:
Wish I could help you with a 390 manual.
I worked for NCR from 1963 to 1966 as a 390 programmer but didn't keep a manual.
It was a very rudamentary machine with a very small memory.
I installed about 7-8 of the systems in various businesses in Philadelphia, PA and used mylar tape program overlays in some applications in order to overcome the small memory.
It was fun and a real learning experience.

Jim Layton
Kansas City, Mo.

jlayton@kc.rr.com
« Last Edit: August 19, 2006, 10:25:34 pm by Flightplannerjim » Logged

Worked for NCR as a 390 programmer in 1963-1966 in Philadelphia, PA.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Page created in 0.053 seconds with 16 queries.